C Series
Specification Work Sheet
5 and 10 mm Continuous Level Transducers
Madison Company can engineer continuous level transducers to meet your application needs. Please provide the following information so that our Engineering Department can determine the appropriate design for your application. If you would rather download a printable version of this form,
click here for a PDF
; fill it out and fax it to 203-481-5036.
Customer:
Contact Name:
Address:
Phone No.:
Fax No.:
E-Mail:
MATERIALS
Stem diameter is 0.5".
Stem:
Stainless Steel
Brass
Float:
Polypropylene
Stainless Steel*
Buna-N
* 1-1/2" NPT outside mount not available with stainless float
* DEADBAND: EXTRA STEM LENGTH TO ALLOW FOR PROPER FLOAT TRAVEL OVER SENSING RANGE
REQUIREMENTS
Sensing Range (6" to 96" standard):
Resolution:
5mm (C3957)
10mm (C3946)
Signal Output:
3-wire — 1-5 VDC
2-wire — 4-20mA
2-wire (resistive) — 1/10 W rating, 100 ohms per 5mm of indication
Controller (specify type):
TOTAL LENGTH
L Total:
OPTIONS
Temperature Sensor:
Type:
High/low set point alarms
MOUNTING
Pipe Plug:
Outside Mount
Flange:
Outside Mount
NPT:
Inside Mount
Other mounting configuration
(please describe below)
1-1/2"
2"
2"
3"
4"
1/2"
3/4"
1"
1-1/2"
NOTES