| Madison-Omni
Sensors: continuous
level sensors with integrated alarm
displays |
| C
Series
Madison-Omni® Continuous Level Sensors
Madison
Company introduces a self-contained, compact
alarm display as an integral part of
its continuous liquid level switch family. The
Madison-Omni is a user-programmable device that
has a simple and secure set of options for level
indication, unit of measure and several other
variables. The LCD display is easy to read, and
a separate red LED light is a visual alarm when
the programmed parameters are outside the set
ranges. The program ring can be removed or left
on the unit in a reverse manner to secure the
settings.
Switch
point indications can be set directly on site
using Madison-Omni Sensors
for upper
and lower set point values. Using the display,
these settings can also be programmed without
the Madison-Omni installed in the tank. The
current values at the measuring point are always
visible
and all the important parameters can be called
up at the point of measurement, saving time
during installation, setup and troubleshooting.
The
analog current signal can be evaluated over
long distances and the momentary value made
available
remotely. Madison-Omni Sensors are configured
to your specifications and are ready for use
without any programming. If you need to change
parameters, use the programming ring directly
on the sensor without any additional tools.
|
