1. Digital Output:
• High in Air. This applies to the following switches: OPT4290-1, OPT4290-2, OPT4291-1, OPT4291-2, OPT4292-1, OPT4292-2, OPT4293-1, OPT4293-2, OPT4294-1, OPT4300-1, OPT4300-2, OPT4300-5, OPT4300-6, OPT4300-9, OPT4300-10, OPT4300-13, OPT4300-14, OPT4303-3, OPT4303-4, OPT4304-3, OPT4304-4, OPT4305-3, OPT4305-4, OPT4305-9, OPT4305-10, OPT4306-3, and OPT4306-4.
• Low in Air. This applies to the following switches: OPT4303-5, OPT4303-6, OPT4304-5, OPT4304-6, OPT4305-5, OPT4305-6, OPT4305-11, OPT4305-12, OPT4306-5, and OPT4306-6.
• Shown with the optional 4th LED wire, (- - - -).
• RLED equals (Vs – 1.2) / 0.01 for typical 10mA LED current. |
|
2. NPN Output:
• High in Air, normally open. This applies to the following switches: OPT4295-1, OPT4296-1, OPT4297-1, OPT4298-1, OPT4299-1, and OPT4301-1.
• Low in Air, normally closed. This applies to the following switches: OPT4295-2, OPT4296-2, OPT4297-2, OPT4298-2, OPT4299-2, and OPT4301-2.
• The value of the external load must be sufficient enough so as not to exceed the maximum current switching capability of the switch.
• External load (minimum value) >= Vs / I max |
|
3. PNP Output:
• High in Air, normally closed. This applies to the following switches: OPT4295-4, OPT4296-4, OPT4297-4, OPT4298-4, and OPT4299-4.
• Low in Air, normally open. This applies to the following switches: OPT4295-3, OPT4296-3, OPT4297-3, OPT4298-3, and OPT4299-3.
• The value of the external load must be sufficient enough so as not to exceed the maximum current switching capability of the switch.
• External load (minimum value) >= Vs / I max |
|
4. Push-Pull Output:
• High in Air. This applies to the following switches: OPT4300-3, OPT4300-4, OPT4300-7, OPT4300-8, OPT4300-11, OPT4300-12, OPT4300-15 and OPT4300-16.
• Low in Air.
• The value of either or both external loads must be sufficient enough so as not to exceed the maximum current switching capability of the switch.
• External load (minimum value) >= Vs / I max |
|
